Scissor Lift Maintenance Requirements & Tips

Views : 474
Author : Nico
Update time : 2022-04-20 09:50:24

Scissor lift is the most widely used overhead lift. They provide access to hard-to-reach places and are a more versatile option than typical scaffolding. Their compact size takes up very little space for storage. They can be used for a wide variety of work tasks, both indoor and outdoor. Like other industrial equipment, they require regular maintenance. This article explains some of the different tips and tricks required to effectively maintain scissor lifts.

One more important thing about scissor lifts: Anyone operating them must meet OSHA standards, which means they have gone through the certification process for both aerial lifts and scissor lifts.

There are four basic types of scissor lifts:

1. Hydraulics: These scissor lifts use manual or engine driven hydraulic systems. Changing the oil pressure in the system can move the platform up and down. Compared with other types of elevators, hydraulic lifts are simple to operate.

2. Electric: Scissor lifts are quieter and emit no exhaust fumes. This makes it ideal for indoor workplaces. Electric cars tend to be small, making them ideal for small, cramped Spaces. Need some electric scissor lift charging tips? Check out this article!

3. Pneumatic: This scissor elevator uses air pressure to lift and lower platforms. They're not as powerful as other scissor lifts, but they don't emit smoke. They can be used in most work environments, including indoors.

4. Rough terrain: this scissor elevator is suitable for outdoor terrain operation site. It can bear heavy loads. It also comes with heavy-duty tires and additional safety features. Scissor lifts for rough terrain can be powered by natural gas or liquid propane.

Each scissor elevator has different maintenance requirements. It is important to have the correct scissor lift repair and maintenance checklist for each type.

Scissor Lift Maintenance Requirements

Scissor lift platforms must be maintained in accordance with manufacturer's lift maintenance requirements. Five tips for scissor lift maintenance include:

1. Perform Regular Maintenance

Scissor lifts are not usually used as much as forklifts and other machines. They are also not as tall as other types of skylifts. As a result, many companies think it's OK to take it easy on maintenance. It's not true! Proper maintenance should never be overlooked or overlooked. If something goes wrong while a worker is in the air, it can result in serious injury or death. Without elevator maintenance requirements, it is almost impossible to operate scissor lifts safely -- accidents are bound to occur due to equipment neglect or poor maintenance.

The inspection of the workplace is also an important part of the regular maintenance of scissor lifts. Scissor lift operators must be able to use lifts safely in the workplace and all workplace hazards must be addressed accordingly.

2. Create a Maintenance Plan

If you do not have a written maintenance plan for scissor lifts, your safety manager should create a maintenance guide. For each scissor lift you use, it should also include the following:

  • Type of lift
  • What kind of maintenance does the manufacturer require
  • When to perform maintenance
  • Scissor lift maintenance list

It is also a good idea to follow ANSI maintenance guidelines for scissor lifts. Their latest guidelines are called the "A92" standard. They outline the employer's responsibilities for inspection, operation, repair, maintenance and training.

ANSI A92.6 provides guidance on the frequency of scissor lift inspections. Such as:

Elevator inspections should be conducted every 90 days or 150 hours, whichever comes first. Annual inspection shall not exceed 13 months from the date of last inspection.

Inspection shall be carried out by a mechanic according to the make and type of lift. They can also inspect lifts with similar design features.

3. Conduct Daily Scissor Lift Inspections

The key to a long-running, reliable elevator is the scissor elevator's maintenance requirements -- which means daily visual inspections for obvious operational defects, safety issues, and so on. Identifying problems before work is the best way to avoid accidents and injuries at work. With CMO's air freight training and certification, your staff can better identify potential problems. Check each scissor elevator before each shift. In this way, workers can identify and solve problems before starting work.Routine inspections can also uncover problems that might not have been noticed until they led to an accident. Make sure all workers who inspect elevators are trained on what problems to spot and how to correct them.

4. Use a Scissor Lift Maintenance Checklist.

Using a complete list will ensure that nothing is overlooked. Guidelines for this process include:

Operational

  • Check all liquid levels. This includes oil, fuel, coolant and hydraulic pressure. Look out for any leaks.
  • Check the wheels and tires. Check for tread wear and wall cracks or bubbles. Make sure the tire pressure is at the right PSI. Check the wheels for any structural damage.
  • Check steering and brakes to make sure they are working properly.
  • Check batteries and chargers. You don't want to lose power at work.
  • Check all emergency controls to ensure they are working properly. This includes horns, gauges, lights and backup alarms.
  • Ensure that all personal protective equipment is in place and working properly. These include safety harnesses, fall-proof devices, and more.

Structural

Check these areas for any problems:

  • Air, electric, pneumatic and hydraulic systems
  • Insulation component
  • Written warnings, placards and instructions
  • Mechanical fasteners and locking pins
  • Cable and wiring
  • Cantilever and stabilizer
  • guardrail
  • Components are loose or missing

Work Zone

Look at the dangers:

  • There are drops, potholes and unstable surfaces
  • Low ceiling
  • Slopes, tunnels and ditches
  • There was debris on the floor
  • Overhead power lines and cables
  • Cost barriers
  • Blind spots, narrow passageways and busy traffic areas
  • Strong winds and other extreme weather conditions
  • Pedestrians nearby

If any scissor lift component is damaged, missing or does not work properly, please do not use the lift until it has been fully repaired. Hazards in the working area must be removed or barricaded to keep elevators at a safe distance.

5. Maintain a Detailed Maintenance History

A written record should be kept for each maintenance of scissor lifts. Write down what you did, when and why. This record is required in the event of a scissor lift accident. A detailed history or list of scissor lift maintenance needs is a good risk management strategy to help prevent accidents and injuries.

The easiest way to keep accurate logs is to use maintenance software. These programs are designed to easily create maintenance schedules for scissor lifts and other overhead lifts. They also give advance notice of upcoming maintenance dates. In this way, scissor lift maintenance work can be carried out on time.

These software programs maintain a detailed maintenance history of each scissor lift. They also allow you to compare the maintenance and repair costs of different elevators. That way you'll know which elevator needs less repair than the others. This helps determine whether it is more cost-effective to repair or replace the elevator.

Other Scissor Lift Repair and Scissor Lift Safety Tips

Provide appropriate safety equipment. Ensure that all workers on the elevator have proper gloves, helmets, seat belts and other safety equipment. If a job requires some kind of equipment, be sure to have it at your disposal.

Check the stability of scissor lift. If a scissor lift feels unbalanced or is placed on uneven terrain, it should not be used until the lift is stable.

Evaluate the position of the guardrail. Check that the guardrail is firm. Guardrail should be repaired or replaced if it shows rust or any other signs of wear.

Check scissor lift after each job. This ensures that minor problems are resolved immediately.

Use spare parts approved by the manufacturer. Don't skimp on cheap parts that may endanger worker safety.

Most importantly, untrained workers should never operate scissor lifts. Even the best-maintained elevators can be deadly in the hands of untrained workers.

Related News
Read More >>
Exploring Chinese Mini Excavators for Sale in the USA Exploring Chinese Mini Excavators for Sale in the USA
Mar .28.2024
Chinese mini excavators manufacturers have been offering competitive products at lower prices in USA compared to other counterparts. This trend has been particularly pronounced in the compact machinery segment, including mini excavators. The increasing popularity of Chinese mini excavators in the USA and the benefits of choosing a mini digger for construction projects make them a compelling option for contractors and construction companies looking to optimize efficiency and reduce costs.
Became a Skid Steer Dealers Today Became a Skid Steer Dealers Today
Mar .26.2024
Are you ready to revolutionize the construction machinery market? A leading skid steer loader factory, is on the lookout for passionate dealers and retailers to join our dynamic team. With our cutting-edge technology and commitment to quality, partnering with us opens doors to lucrative opportunities in the booming construction industry. Explore the benefits of becoming a DIG-DOG skid steer dealer and take your business to new heights.
Best Wheel Loaders for Farm Best Wheel Loaders for Farm
Mar .22.2024
Using the best wheel loaders for farm can significantly enhance work efficiency, reduce labor costs, improve the operational environment, and bring greater convenience and benefits to farmers.
Skid Steer Loaders: A Compact, Versatile Posi-Track Powerhouse Skid Steer Loaders: A Compact, Versatile Posi-Track Powerhouse
Mar .21.2024
Skid Steer Loaders: A Compact, Versatile Posi-Track Powerhouse, it's a small machine among heavy equipment, yet its size hides a world of versatility in the dirt world. In the bustling realm of construction and landscaping, where maneuverability and versatility reign supreme, the skid steer loader emerges as a stalwart companion. Whether tasked with moving heavy materials, clearing obstacles, or tackling intricate projects in tight spaces, this compact yet mighty machine proves its worth time and again. Let's embark on a journey to uncover the multifaceted capabilities, unique features, and undeniable benefits of skid steer loaders.